Foto: CarCare24.eu · Rechthebbende? Meld het

Bilt Hamber

BILT HAMBER FLAT FACE EASY TO SAND SPRAY FILLER

5 L

Lakcorrectie & polish

Vergelijk winkelprijzen
Prijs vergelijken
Eén bekende winkelprijs · 5 L
€ 149,95€ 29,99 / L
Prijs van 1 november
Mogelijk uitverkocht
bij 1 winkel · laatst gecheckt 1 nov

We kennen voor deze maat één winkelprijs. Een vergelijking met andere winkels is nog niet mogelijk.

Bekijk bij CarCare24.eu · € 149,95
1 winkellaatst 1 nov
CarCare24.eu
Prijs van 1 november
incl. btw
Mogelijk uitverkocht · gezien op 1 nov
€ 149,95Naar winkel

We zetten de gevonden productprijzen voor deze uitvoering naast elkaar, ook van winkels in andere landen. Verzendkosten tellen niet mee: controleer bij de winkel wat je in totaal betaalt.

Goedkoper alternatief

Voordeliger dan BILT HAMBER FLAT FACE EASY TO SAND SPRAY FILLER · 5 L

  • Ranex RustbusterRANEX RUSTBUSTER RUST REMOVER4 LZelfde soort: Lakcorrectie & polish · 3 winkels
    € 116,50€ 29,12 per liter3% goedkoper per liter

Per liter of kilo, niet per wasbeurt: de verdunning is onbekend.

Niet hetzelfde product: lees het etiket.

Meer alternatieven en andere maten in de tool →

Productomschrijving

Omschrijving in het Engels, van CarCare24.eu

Why buy this product?

  • Ideal for bodywork refinishing
  • Smooths out surface imperfections
  • Sands effortlessly for a perfect finish
  • Fast-drying and excellent build
  • Compatible with most primers and paints

About this product

Bilt Hamber flat-face is a high-performance spray filler developed to deliver a smooth, level surface before painting. Its easy-sanding formula makes it ideal for repairing minor imperfections, filling pinholes, and evening out uneven substrates. It builds quickly and sands down effortlessly to a flat finish. Flat-face is compatible with most automotive primers and paint systems.

How To Use

Ensure that surfaces are dry and free of any contamination, degrease thoroughly with panel-wipe or clean solvent such as xylene. When spray application is used use suitable organic vapour mask (PP3 grade min) Mix 10 parts, by volume, of base with 1 part by volume of catalyst and stir well. Minimum recommended working temperature is 15ºC. Application with a gravity fed gun is preferable though a suction gun will suffice. Use a 2mm-3mm fluid tip. Hold gun 15-20cm from the panel. Layers may be built up wet-on-wet, but 5-10mins between coats is recommended. Pot life is 20minutes, accelerated curing will occur at elevated temps and if in doubt mix small scale quantity and time cure rate. It is essential that gun, lines and all equipment are cleaned before curing use suitable solvent such as acetone, xylene or similar or quality solvent gun wash. Wet or dry flatting methods can be used though dry flatting is preferred. If wet flatting all traces of moisture should be removed before over coating, this should be carried out with gentle warmth from hot air gun. Product is not suitable for use on aluminium as poor adhesion will occur. This can be addressed by using etchprimer, but all etch-primers should be coated with intermediate non-sanding primer/sealer before flat-face coating. Do not use product in damp conditions.

Specifications

  • Size: 5L

Bron: CarCare24.eu (winkel)Bezwaar over deze tekst?

Tekst in het Engels, overgenomen van de winkel.

Specificaties
MerkBilt Hamber
CategorieLakcorrectie & polish
Inhoud5 L
Correctie voorstellen