Leather Steering Wheel Set, zwart, kit 12 componenten

Content

• 100 ml Leather Cleaner mild
• 100 ml Leather Shield
• 100 ml Leather Fresh
• 100 ml Degreaser
• 15 ml Elephant Leather Preserver
• 1 x Foamer Bottle
• 1 x Sanding Pad
• 2 x Viscose cloth
• 3 x Cleaning & Application Sponge small
• 2 x Nitril Gloves

Description

The Leather Steering Wheel Set is specially designed for restoring color and repairing all worn and scratched black steering wheels. The Leather Steering Wheel Set includes all the necessary components to renew the color and finish. The included instructions ensure professional results.

Our products are easy to use, making them accessible even to non-experts. The package includes detailed step-by-step instructions that guide you safely through the entire restoration process. The necessary accessories are also included to ensure practical handling.

Applications

Steering wheels

Recommended Use

Please test all products on an inconspicuous area first to prevent any unwanted changes to the steering wheel. We also recommend wearing appropriate protective gloves during all steps of the process.

1. Cleaning – the foundation for perfect results

• Fill the empty foamer bottle completely with Leather Cleaner Mild
• Apply the foam to a sponge
• do not apply directly to the steering wheel
• Clean the entire steering wheel with the foam
• Lightly dampen the included cloth and remove dirt and any remaining cleaner
• Allow the surface to dry completely
• Repeat the cleaning process if necessary

2. Sanding – for smooth transitions

• Carefully smooth out rough spots with the sanding pad

3. Degreasing – for optimal adhesion

• Apply a few drops of degreaser to the included cloth and spread evenly
• Allow to air dry thoroughly again

Tip

• To check adhesion: Apply masking tape and peel it off again → If it sticks firmly, the surface is optimally prepared

4. Dyeing – targeted refreshment for your steering wheel

• Shake Leather Fresh well
• Apply by dabbing with the sponge
• never apply directly to the steering wheel
• Dry with a hair dryer after each thin layer
• Apply several thin layers for an even result
• After dyeing, the surface must dry for 24 hours

For older steering wheels

• Use Elephant Leather Preserver: Apply a small amount of leather grease to the third cloth and apply evenly without applying pressure
• Let the leather grease soak in overnight
• The next day, polish thoroughly to restore the natural texture
• Alternatively: If no re-greasing is necessary, proceed directly to Step 5 (sealing)

Tip

• An uneven application of color can be carefully evened out with the sanding pad and then re-tinted.
• Leather Fresh can also be applied to synthetic leather and plastics
• Take special care when working on seams with different colors

5. Sealing – for a like-new, protected surface

Before sealing, the leather must be dry for at least 24 hours, clean, and free of residue.

Here’s how

• Apply a few drops of Leather Shield to the sponge
• Apply thinly and evenly without rubbing too hard
• One application is usually sufficient
• Repeat the process only for extremely delicate or highly absorbent leather
• Then dry with a hair dryer.

Maintenance interval

Heavily used leather surfaces (e.g., exposure to sunlight, frequent use): treat every 3 months Leather surfaces with normal use: every 6–12 months is sufficient

Warnings

Please test all products on an inconspicuous area first to ensure they do not cause any unwanted changes to the steering wheel. We also recommend wearing appropriate protective gloves during all steps of the process.