CQUARTZ UK 3.0 30 ml kit met Reload 100 ml

Coat your car with the glossiest and hardest coating available on the open market!

The incredible 70% SiO2 with 99.9% purity formula is based on the same technology as the original CQUARTZ with some interesting tweaks. Other ceramic coatings have far less SiO2 (Quartz) in the product, however CQUARTZ UK has 70% SiO2 with 99.9% purity . This is the first ever coating which has this concentration! The pure quality ensures the most transparent glass coat film over the surface, which guarantees long lasting coating with extreme strength and water-repellency. Once the liquid meets the open air it cures and forms a ceramic quartz hard coating on the surface with extreme hydrophobicity and gloss beyond even that of CQUARTZ.

Why SiO2?

SiO2 is one of the hardest material in the world. It creates a very clear but still long lasting hard coating on automotive surfaces.

Kit Includes:

• (1) 30ml bottle of CQUARTZ UK Edition.
• (4) 4" MF suede applicators.
• (1) CQUARTZ applicator block.
• (1) Reload 100ml bottle.
• (1) 16"x16" Orange suede leveling towel.

Features:

• High durability, outlasting may of the competitors "professional" coatings.
• Gloss comparable or better than many of the competitors "professional" coatings.
• Easy to apply with a long wipe-off window.
• CQUARTZ UK has 70% SiO2 with 99.9% purity!
• Deep, rich appearance.
• Easy maintenance with "self cleaning" properties. Stays cleaner longer.
• Resistance to wash induced marring.
• Minor swirl filling abilities.
• Repels water, oils, dirt, and contaminants.
• Protection from UV rays.
• Resists stains, bird droppings, water spots, and traffic film.
• Resists extremely high temperatures. Feel free to coat engine components, wheels, and more.

Specifications:

• Durability: 2 ~ 5 years.
• Thickness: 1~2 micron per coat.
• Coverage 10ml per coat +/-.
• Water contact angle: 110°.
• Light swirl filling properties.
• Recommended working temperatures: 40F to 90F.
• Can also be layered: 2nd layer may be applied within 45-60 minutes of the first or wait until the following day if you are beyond 60 minutes.

Surfaces you can protect with CQUARTZ:

• Paint.
• Wheels.
• Plastics.
• Glass.
• Metals.

Tips:

• Watch video for application tips & tricks - https://www.youtube.com/watch?v=_lq9Q4VdEvM
• If contamination exists, Iron X and Clay your vehicle before polishing.
• To gain the most from CQUARTZ your vehicle should have all surfaces 100% clean and paint polished to a high level.
• Use CARPRO Reflect to achieve an incredible high gloss finish in less time with no fillers.
• Use CARPRO Eraser to remove any oils leftover after polishing - This is critical to ensure durability of CQUARTZ.
• We recommend coating removal towels: CARPRO 2 Face (No Lint) 16" x 16" - Blue/ Orange 10 Pack , Microfiber Madness Slogger (16" x 16") or Edgeless White Polish Towel - 16" x 16" .
• We recommend extra suede applicators if applying more than 1 coat - CARPRO Suede MicroFiber Applicator 4"x4" 10 PACK .
• Finding the right time to "level" (wipe off) excess coating after it flashes:

Precautions:

• Do not apply in direct sun or on hot surface.
• Do not re-use 4" Suede applicators.
• Do not re-use the towels you used to buff off with on paint.
• Wear hand protection .
• Wear respiratory protection such as painters mask.

Read "Tips" above before coating

1. Wrap a 4" Microfiber Suede around the black side of applicator block.
2. Shake CQUARTZ UK.
3. Slowly open bottle and drag one or two lines of product down the applicator.
4. Spread across paint in a criss cross pattern approximately 2 sq ft at a time depending on conditions.
5. Buff off as soon as it flashes (within 2-5 minutes depending - see tips above ) using a CARPRO No Lint Ultra Towel 16" x 16" .
6. Be sure to remove all excess residue and only then do you move to the next section.
7. Switch out the 4" Suedes every 2+/- panels.
8. Additional coats may be applied within 45-60 minutes or wait until the following day if you are beyond 60 minutes. CARPRO recommends 2 coats. Max Layer - 3 coats.
9. Apply Reload after final coat within 30-60 mins. Wait until next day for Reload if you miss the 30-60 minute window or at least a minimum of 12 hrs.

After Tips:

• Keep surface dry for at least one hour after application (For best results keep dry 24 hours).
• Gently wipe any water off the surface during the first 24 hours after application.
• Avoid detergents and chemicals for 5 days after application.
• If it is dry and the air is clean outside then you may park the vehicle in direct sun after application to speed the curing.

Coating Maintenance:

1. The best thing to do is start using CARPRO Reset to wash with regularly. Other soaps can leave residue that temporarily messes up the beading and allows dust and dirt to stick more readily.
2. Wash Mitt:
3. Drying Towel: CARPRO or Microfiber Madness .
4. Quick Detailing : CARPRO ECH2o Concentrate and Microfiber Madness Crazy Pile towels (need about 3-6 towels).
5. Occasionally (every 3 to 6 months) decontaminate surface with CARPRO Iron X . Use during wash cycle (after Reset) and as directed.
6. If using CARPRO Reload as topper: use every 3 months, for special occasions or any time you like.

*CARPRO states shelf life expectancy is 2 years unopened, and 6 months or less once opened.* *We recommend using within 14 months of manufacture is possible*