Innovacar S2 Foamy Green Foam

Fresh forest

THE BENEFITS OF S2 FOAMY COLOR GREEN

Innovacar's S2 Foamy Color Verde is the car shampoo with green foam and active foam to clean and wash your car efficiently and effectively . The colour result is an added value that does not detract from the cleaning capabilities of the original version.

Combining a cheerful and colorful effect with car washing is something you must try. Plus it is PH neutral, therefore it does not harm the protective aspects of any previously applied films.

The main benefits:

• Adherent green active foam : the result is a colored foam that frames your car, completely enveloping it. A practical benefit of the green foam is its function during the rinsing phase, as it makes it easy to see residues and allows you to better organise time and duration of the task.
• Plant-derived surfactants: thanks in part to the use of plant-derived surfactants and the absence of added phosphorus, EDTA and NTA***, the formula is completely biodegradable.
• Fresh Forest : During washing an intense fresh scent will be released and will persist throughout the entire phase.
• Deep** organic decontamination : Green S2 Foamy Color with added enzymes provides deep** cleaning, subject to patent protection*, which makes it possible to clean the most stubborn organic dirt with a direct action on the dirt substrate molecules.
• pH neutral product : the solution is pH neutral, i.e. 6.00, and is suited to prevent negative interactions with the protective nanotechnological layers.
• In relation to the delicate parts of the car : also thanks to the use of plant-based surfactants and not containing any added sodium hydroxide, it is also possible to safely clean plastic parts and gaskets.
• Concentrated product : just a small amount to obtain deep and effective washing with a high cleaning strength.

Average consumption : 20 ml per vehicle.

Summary technical data

• Cleaning action : 4/5
• Foam effect : 5/5
• With enzymes : YES
• Coating safety: : YES
• Surface safety : YES
• pH : 6.00

Patent Application No. 14730984.3

** Compared to the version without enzymes *** May contain traces.

S2 FOAMY COLOR GREEN IS IDEAL FOR

• Washing the car with a spectacular color.
• Washing cars with previous nanotechnological protection or coating and polishing treatments.
• Gently cleaning car plastic and gaskets.
• Deeply** removing organic and road dirt.

HOW TO USE S2 FOAMY COLOR GREEN

We recommend using green active foam car shampoo with a foam gun. The brightness of the color depends on how diluted the product is. For correct use:

1. Dilute the product according to the indications and selected mode of use.
2. Stir the foam wand to mix the detergent and water to obtain a homogenous solution.
3. Deliver the foam over the entire car, starting on the bottom and applying it horizontally to then gradually move upwards. This will prevent any dripping during rinsing.
4. Proceed with rinsing with plenty of high pressure water, starting from the top of the car and gradually working downwards.

Be particularly careful to rinse generously until all of the color is completely removed from the car and hidden nooks.

If applied with a foam lance or foam gun : the recommended dilution ranges from 1:9 to 1:12, use from 100 ml to 75 ml of product and add the remaining part of water (from 900 ml to 925 ml) to obtain 1 L of ready-for-use solution. During supply, the actual final dilution can reach approximately 1:150 to 1:195.

For frequent washing the recommended dilution ranges from 1:25 to 1:50, use from 40 ml to 20 ml of product and add the remaining part of water (from 960 ml to 980 ml) to obtain 1 L of ready-for-use solution. While dispensing, the actual final dilution can reach approximately 1:390 to 1:765.

If used for pre-washing for weekly dirt: the recommended dilution ranges from pure to 1:20, i.e. use up to 50 ml of product and fill the remaining part with water (950 ml) to obtain 1 L of ready-for-use solution. While dispensing, the actual final dilution can reach approximately 1:315.

Precautions : do not apply in the sun and on hot surfaces, fabrics or porous surfaces. Do not let the product dry. When diluting the pure product it is advisable to use suitable gloves and be careful to protect your hands and clothes from the pure color as it is highly concentrated.

PRODUCT CODE

700508 - S2 FOAMY GREEN FRESH FOREST 1000 ml

DANGER

Remove contact lenses if present and easy to do. Continue rinsing.

Contains : CAPRYL GLUCOSIDE, ETHANOLAMINE, acetic acid, (2-butoxyethoxy), SODIUM C14-16 OLEFIN SULFONATE. BUTYLPHENYL METHYLPROPIONAL, TETRAMETHYL ACETYLOCTAHYDRONAPHTHALENES, 4-TERT-BUTYLCYCLOHEXYL ACETATE. may produce an allergic reaction.

Contains among other ingredients : Equal to or greater than 15% but below 30%: non-ionic surfactants. Equal to or greater than 5% but below 15%: anionic surfactants. Less than 5%: Polycarboxylates. Enzymes. Perfume (AMYL CINNAMAL, D-LIMONENE, BUTYLPHENYL METHYLPROPIONAL, COUMARIN, HEXYL CINNAMAL, LINALOOL, ALPHA-ISOMETYL IONONE), preservatives (BENZISOTHIAZOLINONE, PHENOXYETHANOL).

Click here to download the data sheet