Colourlock Old Leather Softener

The Old Leather Softener is used to loosen the stuck, solidified leather fibres. With the product and by milling the leather, it becomes a little softer and less susceptible to breakage

Areas of application

Leather repair

Recommended use

Before using the Old Leather Softener, clean the surface accordingly and allow it to dry. Crack and break repairs with liquid leather must be carried out before treatment with the old leather softener. Apply old leather softener to a sponge or soft cloth and wipe the leather with it. The ideal treatment is from the back of the leather. After application, allow the leather to rest at room temperature for at least 24 hours. Repeat the process if necessary. After each treatment, gently roll and knead the leather to loosen the fibres. Do not carry out more than 3 treatments. A maximum of one litre of old leather softener is required for a complete, very dry vehicle interior. The surface must be degreased again before a colouring process. The leather is then cared for.

Warnings

Shake before use! Check material compatibility before use (always test for visual and tactile changes in a hidden area first). Protect against frost and heat.

Hazard information DANGER

May be fatal if swallowed and enters the respiratory tract.

May be harmful to aquatic life with long-term effects.

If medical advice is needed, have product container or label at hand.

Keep out of the reach of children.

DO NOT induce vomiting.

Store under lock and key.

Dispose of the contents/container at an authorised disposal facility in accordance with local, regional, national or international regulations.