CarPro Metallicut metal polish compound

Warning: This product will not be shipped to and is not for sale or use in the State of California. If you use or sell this product in the state of California, you accept full responsibility per California law.

The metal polish you've been waiting for has arrived! With MetalliCut, CARPRO set out to redefine the limits of a metal polish, and we believe they have! No expense was spared in the design of MetalliCut... With diamond abrasive powders to complement the diminishing abrasive compound, CARPRO created a fast cutting metal polish that finishes down to an extreme gloss! Not only does MetalliCut save time and produce superior results in general but is safe even on soft metals!

MetalliCut is the go-to metal polish for professional detailers and enthusiasts looking to improve or perfect their exhaust tips, chrome or aluminum wheels, bumpers and metal trim! For a better than new shine, pair MetalliCut with your machine polisher and one of our polishing pads!

Features:

• Diamond & diminishing abrasives.
• Produces an extreme shine!
• Effective on all types of metals, including stainless steel, aluminum, and chrome.
• Can be used by hand or machine.
• Safe on soft metals.
• Easy to use.

Available Sizes:

• Available in 150 ml and 500 ml

Directions:

By hand:

1. Apply a small amount of MetalliCut to a microfiber towel or wire wool depending on the metal type and goal.
2. Using firm pressure, work Metallicut into the metal surface until the product becomes less opaque.
3. Use a clean microfiber towel to buff away any additional residue.
4. Repeat steps 1-3 if necessary.

By machine:

1. Apply 6-8 drops of MetalliCut to a firm foam polishing pad.
2. Spread MetalliCut on the surface at speed 1-2.
3. Increase to speed 3 ~ 5 until the abrasives are broken down and a high gloss is achieved.
4. Using a clean microfiber towel, remove excess residue.
5. Repeat steps 1-3 as necessary.

By foam cone or buffing ball:

1. Apply a liberal amount of MetalliCut to the chosen tool.
2. Spread MetalliCut at low speed.
3. Increase the speed of the drill and use a medium to high speed until the abrasives are broken down.
4. Using a clean microfiber towel, remove excess residue.
5. Repeat steps 1-3 as necessary.