CLEAN. By Pan The Organizer Ceramic Spray Coating 1 Year

CLEAN. By Pan 1-Year CERAMIC SPRAY COATING

The next evolution of protection is here. CLEAN. By Pan CERAMIC SPRAY COATING delivers outstanding gloss, extreme slickness, and high-performance hydrophobic protection in a fast, effortless spray application. Built from the same advanced base resin found in Pan’s professional ceramic coatings, this formula forms a dense silica backbone for exceptional durability, clarity, and chemical resistance.

The result? A 1-year ceramic spray coating with higher gloss , smoother slickness , and 110° water contact angle beading —all without the intensive prep required by traditional coatings.

Safe for paint, wheels, glass, trim, PPF, vinyl, lights, and matte finishes. PFAS-free and incredibly efficient, offering up to 3–6 full vehicles per 3 oz bottle .

Whether you’re a pro detailer or an enthusiast, this is the ultimate blend of performance, simplicity, and eye-catching results.

DIRECTIONS FOR USE

1. Wash the vehicle using CLEAN. By Pan Shampoo and dry thoroughly.
2. Optional: If needed, perform paint decontamination using CLEAN. By Pan Iron Remover and the CLEAN. By Pan Clay Towel.
3. Optional: If the paint is faded, oxidized, or contains scratches or swirls, proceed with paint correction using CLEAN. By Pan Spray Polish and appropriate pads.
4. For maximum bonding and durability , remove remaining polishing oils and residues using CLEAN. By Pan Panel Prep Spray. Wipe clean with a microfiber towel.
5. Apply the coating: Spray a liberal amount of CLEAN. By Pan Ceramic Spray Coating onto a CLEAN. By Pan Level One microfiber towel or applicator. Spread evenly over the surface using a cross-hatch pattern. Allow the coating to self-level for 1–2 minutes , then remove any excess with a CLEAN By Pan Final Level microfiber towel. An additional layer may be applied within 1 hour of the initial application.
6. Curing: Allow 1 hour of dry time before exposing the vehicle to water or rain.
7. Applying as a sacrificial topper over CLEAN. By Pan 3-Year or 8-Year Ceramic Coatings: Wait 12 hours after applying the base ceramic coating, then apply the ceramic spray coating on top.

FEATURES

• 1-Year Ceramic Protection Hybrid organic–inorganic silica film.
• Ultra-High Gloss & Extreme Slickness Even glossier than Pan’s ceramic coatings with a buttery smooth finish.
• 110° Water Contact Angle Sharp, tight water beading and outstanding hydrophobic performance.
• Fast Water-Ready Cure Water and rain safe in just 1 hour at room temperature.
• Strong Chemical Resistance pH 2–12 after full cure (7 days).
• Minimal Prep Required Bonds even on non-decontaminated surfaces thanks to enhanced adhesion promoters.
• Multi-Surface Application Safe for paint, wheels, glass, plastic trim, lights, PPF, vinyl wraps, and matte finishes.
• PFAS-Free Formula Safe to use.
• Extremely Efficient 3–6 full vehicles per 3 oz bottle , depending on technique.
• Shelf Life: Best before 12 months from manufacture (opened or unopened).