RANEX RUSTBUSTER RUST REMOVER

Remove rust with RANEX Rustbuster 500 ML Simple and effective rust removal without sanding. Suitable for rust, surface rust, and pitting rust. Applicable to any metal: iron, steel, stainless steel, chrome, copper, aluminum, and galvanized steel. Rust is destroyed and removed down to the core, resulting in a 100% rust-free surface. Ranex Rustbuster provides very good adhesion to coatings. If the surface is to be overpainted, any 1K and 2K primer or coating can be used. Applications RANEX Rustbuster Ranex Rustbuster is a versatile product for removing rust. In addition to being used as a rust remover, Ranex Rustbuster can also be used to remove limescale, rust particles, and flash rust. • Rust remover • Remove rust particles • Remove flash rust • Remove rust spots • Remove limescale RANEX Rustbuster user manual The Ranex Rustbuster instructions are easy for anyone to apply to remove rust from metal. To use Ranex Rustbuster correctly, follow the step-by-step plan below. Remove rust • Remove loose paint and rust. • Clean the surface with a degreaser. • Ensure the surface is dry. • Ranex Rustbuster can be applied with a roller or brush. • Let Ranex Rustbuster dry for 24 hours. Finished! Remove flash rust with RANEX Rustbuster With Ranex Rustbuster, you can also remove flash rust, particularly on stainless steel and chrome. You can also easily remove rust and rust spots on coatings with RANEX. To use Ranex as a flash rust remover, you must apply the product differently than you normally would. Follow the steps below to remove flash rust with Ranex Rustbuster. • Apply Ranex Rustbuster with a brush or roller. • Let it soak in for 15 to 30 minutes. • Caution, do not let the product dry out! • Rust removed? Rinse it with water or wipe it with a wet cloth. Features Ranex Rustbuster 250ml • Powerful rust removal • Remove rust deep into the core and pores • Has no adverse effect on coating, paint, polyester, or rubber • Provides metal with temporary protection for up to 6 weeks • Ensures a good base layer - adhesion to primer, undercoat, or coating • Ideal for removing rust in hard-to-reach places • Consumption: • 1 liter = 8m2 for heavy rust • 1 liter = 30m2 for light rust, surface rust, and rust streaks