BILT HAMBER FLAT FACE EASY TO SAND SPRAY FILLER

Why buy this product?

• Ideal for bodywork refinishing
• Smooths out surface imperfections
• Sands effortlessly for a perfect finish
• Fast-drying and excellent build
• Compatible with most primers and paints

About this product

Bilt Hamber flat-face is a high-performance spray filler developed to deliver a smooth, level surface before painting. Its easy-sanding formula makes it ideal for repairing minor imperfections, filling pinholes, and evening out uneven substrates. It builds quickly and sands down effortlessly to a flat finish. Flat-face is compatible with most automotive primers and paint systems.

How To Use

Ensure that surfaces are dry and free of any contamination, degrease thoroughly with panel-wipe or clean solvent such as xylene. When spray application is used use suitable organic vapour mask (PP3 grade min) Mix 10 parts, by volume, of base with 1 part by volume of catalyst and stir well. Minimum recommended working temperature is 15ºC. Application with a gravity fed gun is preferable though a suction gun will suffice. Use a 2mm-3mm fluid tip. Hold gun 15-20cm from the panel. Layers may be built up wet-on-wet, but 5-10mins between coats is recommended. Pot life is 20minutes, accelerated curing will occur at elevated temps and if in doubt mix small scale quantity and time cure rate. It is essential that gun, lines and all equipment are cleaned before curing use suitable solvent such as acetone, xylene or similar or quality solvent gun wash. Wet or dry flatting methods can be used though dry flatting is preferred. If wet flatting all traces of moisture should be removed before over coating, this should be carried out with gentle warmth from hot air gun. Product is not suitable for use on aluminium as poor adhesion will occur. This can be addressed by using etchprimer, but all etch-primers should be coated with intermediate non-sanding primer/sealer before flat-face coating. Do not use product in damp conditions.

Specifications

• Size: 5L