CarPro Hydrofoam Wash & Coat

Ceramic Sealant & Auto Wash in One Simple Step!

Experience the next level of convenience and protection with CARPRO HydrO2 Foam, a revolutionary product that combines car wash and ceramic sealing in a single, effortless step. Designed with a pH-neutral formula, HydrO2 Foam safely lifts and removes dirt from all solid surfaces without compromising your vehicle's finish. Whether you're washing paint, glass, plastic, or wheels, this versatile solution provides a gentle yet effective clean.

HydrO2 Foam is formulated with hydrophilic glass fibers and silicon polymers that bond to your vehicle’s surfaces during use. As you wash, the rich foam not only cleans but also leaves behind a hydrophobic coating that repels water, dirt, and contaminants. The result is a durable, glossy finish that protects against the elements and reduces maintenance time.

The advanced formula delivers instant results—there’s no cure time required, and instantly dries off with ease. After rinsing, your vehicle will be coated with a protective silica shell that offers lasting UV protection, resists acids and alkaline solutions, and maintains a brilliant shine for 3 months or more. HydrO2 Foam makes it easy to keep your vehicle looking pristine with minimal effort and maximum protection.

Features:

• Wash & Protect: Combines cleaning and sealing in one easy application.
• Instant Results: No cure time needed—just wash, rinse, and go!
• pH Neutral Formula: Gentle on all surfaces, including delicate finishes.
• Effortless Dirt Removal: Lifts dirt safely without compromising your paintwork.
• Enhanced Shine: Boosts gloss, depth, and smoothness for a showroom-quality finish.
• Versatile Application: Safe for use on various surfaces.
• Hydrophobic & Dirt Repellency: Repels water and dirt for a cleaner surface longer.
• UV Protection: Shields your vehicle from harmful sun damage.
• Durable Performance: Resists acids, alkaline solutions, and solvents, lasting 3+ months.

Precautions:

• Do not apply HydrO2 Foam in the sun or to a hot surface.
• In shaded location rinse the vehicle of all grit.
• If vehicle is extremely dirty, we recommend first washing with CARPRO Reset.

Directions by hand:

1. Rinse vehicle.
2. Apply a small amount of Hydro2 Foam directly to wet mitt and spread across one panel.
3. Wash the panel as normal.
4. Rinse mitt and panel thoroughly.
5. Move to next panel and repeat steps 2-4.
6. Rinse the entire vehicle well.
7. Dry any remaining water with your favorite CARPRO or Microfiber Madness Drying towel.

Directions with Foam Cannon or Foam Sprayer:

1. Dilute 1:9 in foam cannon or foam sprayer .
2. Foam surface working panel by panel. ( DO NOT allow soap to dry on surface ).
3. Wash with wash mitt (as usual) making sure to thoroughly rinse panel.
4. Move on to next panel and w hen vehicle is finished rinse entire vehicle very well.
5. Remove any remaining water with your favorite CARPRO or Microfiber Madness Drying Towel.
6. If vehicle has been previously washed, you can skip the mitt and spray and rinse.

Handling High Spots

Now, let's talk about what to do if you leave HydrO2 Foam on the paint too long or if it dries. If you are unsure of what a high spot is, it can be noted as a discoloration, or a rainbow effect on parts of the vehicle. This is caused when there is more product in one area that was not rinsed off effectively. It its very undesirable and can take a few weeks to wear away if not attended to immediately. If you need some visuals on this, there is a great section in our HydrO2 Foam Video that shows you exactly what to look for.

• Immediate Fix
• Delayed Fix

It’s crucial to act quickly if you notice any high spots. The sooner you address them, the easier they are to fix. Using a quick detailer or reapplying HydrO2 Foam usually does the trick.