Auto Finesse Iron Out Fallout Remover

Iron Out is the heavy-hitting reactive gel that eradicates embedded ferrous metal particles — the sharp brake dust shrapnel that washes alone can never touch. It dissolves those tiny, corrosive bits of metal that embed into your paint, glass, and wheels, preventing scratches, swirls, and long-term corrosion before they start. As it works, the formula turns blood red, visibly showing you exactly where the contamination was hiding and locking it safely in solution so it rinses away clean. Use it every 3-6 months on daily drivers and you’ll keep your paint protected and your wheels free from destructive buildup. Essential before polishing or applying any protection layer — because once those particles are sealed in, the damage is already done. Stop ignoring the contamination you can’t see. Get your surfaces truly clean and ready for flawless results. How to Use Iron Out Fallout Remover

Wash the vehicle thoroughly and ensure the surface is cool and in the shade. Spray or apply Iron Out generously onto paintwork, glass, or wheels. Let it dwell and react — watch it turn purple/red as it dissolves ferrous contamination (3–5 minutes, longer on heavy areas). Gently agitate stubborn spots with a foam or microfibre applicator to refresh the solution if needed. Rinse thoroughly with high pressure — do not allow it to dry on the surface. Follow with clay bar (if full decontamination) or move straight to polishing/protection.

•We recommend avoiding brake discs and pads when using this product. •Do not leave to dry on the vehicle.