Photo : CarCare24.eu · Titulaire des droits ? Signalez-le
BILT HAMBER FLAT FACE EASY TO SAND SPRAY FILLER
5 L
Correction de peinture & polish
Nous connaissons un seul prix de boutique pour ce format. Une comparaison avec d’autres boutiques n’est pas encore possible.
Voir chez CarCare24.eu · 149,95 €Prix des produits, hors frais de livraison. Les frais de livraison figurent par boutique. Classé par prix. Notre comparaison ne couvre pas toutes les boutiques (214 boutiques comparées). Les liens partenaires nous rapportent une commission, mais ne changent pas l’ordre.
Nous comparons côte à côte les prix trouvés pour cette version du produit, y compris de boutiques d’autres pays. Les frais de livraison ne sont pas inclus : vérifiez auprès de la boutique ce que vous payez au total.
Alternative moins chère
Plus avantageux que BILT HAMBER FLAT FACE EASY TO SAND SPRAY FILLER · 5 L
- Ranex RustbusterRANEX RUSTBUSTER RUST REMOVER4 LMême type : Correction de peinture & polish · 3 boutiques116,50 €29,12 € par litre3 % moins cher par litre
Par litre ou par kilo, pas par lavage : la dilution est inconnue.
Pas le même produit : lisez l’étiquette.
Description du produit
Description en anglais, source : CarCare24.eu
Why buy this product?
- Ideal for bodywork refinishing
- Smooths out surface imperfections
- Sands effortlessly for a perfect finish
- Fast-drying and excellent build
- Compatible with most primers and paints
About this product
Bilt Hamber flat-face is a high-performance spray filler developed to deliver a smooth, level surface before painting. Its easy-sanding formula makes it ideal for repairing minor imperfections, filling pinholes, and evening out uneven substrates. It builds quickly and sands down effortlessly to a flat finish. Flat-face is compatible with most automotive primers and paint systems.
How To Use
Ensure that surfaces are dry and free of any contamination, degrease thoroughly with panel-wipe or clean solvent such as xylene. When spray application is used use suitable organic vapour mask (PP3 grade min) Mix 10 parts, by volume, of base with 1 part by volume of catalyst and stir well. Minimum recommended working temperature is 15ºC. Application with a gravity fed gun is preferable though a suction gun will suffice. Use a 2mm-3mm fluid tip. Hold gun 15-20cm from the panel. Layers may be built up wet-on-wet, but 5-10mins between coats is recommended. Pot life is 20minutes, accelerated curing will occur at elevated temps and if in doubt mix small scale quantity and time cure rate. It is essential that gun, lines and all equipment are cleaned before curing use suitable solvent such as acetone, xylene or similar or quality solvent gun wash. Wet or dry flatting methods can be used though dry flatting is preferred. If wet flatting all traces of moisture should be removed before over coating, this should be carried out with gentle warmth from hot air gun. Product is not suitable for use on aluminium as poor adhesion will occur. This can be addressed by using etchprimer, but all etch-primers should be coated with intermediate non-sanding primer/sealer before flat-face coating. Do not use product in damp conditions.
Specifications
- Size: 5L
Source : CarCare24.eu (boutique)Une objection à ce texte ?
Texte en anglais, repris de la boutique.
