Photo: Detail Wash · Rights holder? Let us know

Hendlex

Hendlex M3 Set

Ceramic coating

Compare shop prices
Compare prices
Shop prices · Hendlex M3 Set

No known shop delivers to the Netherlands

1 shoplast 14 Nov
Detail Wash
Does not deliver to the Netherlands
Belgium
In stock · checked 14 Nov
Item no. M3S40 · Product ID 30919 · incl. VAT
€134.99Go to shop

We put the product prices we found for this version side by side, including shops in other countries. Shipping costs are not included: check at the shop what you pay in total.

Product description

PRÉPARATION DE LA SURFACE

Préparez adéquatement la surface avant l’application de Hendlex M3. Directives à suivre pour assurer l’efficacité du produit :

La surface doit être soigneusement lavée, exempte de graisse, de contaminants et de résidus.

Les revêtements ou cires antérieurs doivent être retirés. Le dissolvant de cire Hendlex est recommandé.

Il est fortement recommandé de polir la voiture pour éliminer les rayures, les tourbillons ou les hologrammes.

Assurez-vous que la surface est complètement sèche.

Remarque : il est recommandé d’utiliser Hendlex Paint Prepare avant d’appliquer le revêtement pour de meilleurs résultat.

Utilisation :

  1. Handle the applicator by the base. Place the application cloth on the soft part of the applicator, tightening it into cutouts on both sides.

*For smaller areas it is recommended to solely use the application cloth without using the applicator.

  1. Open the bottle and wet the application cloth entirely. Throughout the process of coating, keep the application cloth wet by applying additional 5-6 drops.
  1. Coat the surface evenly in criss-cross motion. Do not use circular movements for product coating. Coat one panel at the time. Try to coat from edge to edge to avoid coating layering marks. Make sure there are no uncovered spots left.
  1. After applying coating, wait for:
  • if temperature is lower than +24 °C – 3 minutes;
  • if temperature is higher than +24 °C – 1 minute;
  • do not coat if temperature is more than +30 °C.
  1. Polish the surface with the high quality microfiber cloth. Make sure there are no unpolished spots left.
  1. Recommended coating curing period:
  • if the temperature is higher than +22°C – 12 hours initial;
  • if the temperature is +20°C – 24 hours initial.

Do not wash the car for at least 7 days. Depending on the environment temperature, the coating fully hardens in 7 days

ATTENTION !

N’appliquez pas le revêtement sur des surfaces mates ou en plein soleil.

Plage de température d’application appropriée : +10 °C à +25 °C.

À ne pas enduire si la température est supérieure à +30 °C.

Après avoir fini d’appliquer le revêtement, polissez-le à l’aide d’un chiffon en microfibre.

Assurez-vous qu’il n’y a pas de taches non polies.

Source: Detail Wash (shop)Objection to this text?

Taken from the source.

Specifications
BrandHendlex
CategoryCeramic coating
Article numberM3S40

Explained

Explanations and tips from brands and sources about this topic.

You open the message at the source itself. We do not store the text.

Suggest a correction